Elevator Boat Lifts are used on restricted waterfronts where outboard pilings are not allowed, such as on narrow canals, or where the driving of pilings is difficult due to hard bottom conditions. Imm Quality’s elevator boat lifts can be mounted on seawalls or pilings and in a vertical or inclined position. Our elevator boat lifts are gusseted using one-inch thick billet aluminum plates which have CNC machined channels that accept the upper and lower flanges of the carriage I-beam (see video below).
No other manufacturer has this feature. Not only does this provide mechanical support for the I-beam, but it also guarantees the correct geometry in all 3 dimensions and fixes the proper angles for the arms. With Imm Quality’s superior manufacturing capabilities, there is no need to worry about over-stressed welds or your elevator arms being out of alignment.